Production of
innovative
protective coatings

Перейти на русскую версию Перейти на английскую версию
Arabic Chinese (Simplified) Czech French German Hindi Japanese Korean Persian Polish Turkish
+7 843 227-00-99
Kazan, Vakhitov str., 6 (on the map)

  • icon
  • icon

SR-GLUE COMPOUND

 

Application:

Designed for bonding layers of sheet building material (drywall, gypsum fiber sheet, cement particleboard, OSB, plywood, etc).

Application conditions:

The air temperature is not lower than + 5 °C, the relative humidity is not more than 75%.

Storage conditions:

Air temperature during transportation and storage should not be below +1°C and above +35°C. Transportation and storage at air temperature up to -40°C for a period of not more than 25 days is allowed. Allowed a total of 5 cycles of freezing and thawing of the product. There is a decrease in its shelf life during transportation and storage of the product at a temperature above + 35 C.

Surface preparation:

Surface preparation before application includes mechanical cleaning of dust and dirt and if necessary, it’s degreasing.

Solvent:

Water from a centralized source of water supply.

* Note: this text contains only general (introductory coverage) information. More information you can obtain by contacting the representative of the company "Innovative technologies".

SR-GLUE SEALANT

 

Application:

It is used as an auxiliary material in combination with the compound SR-GLUE. Designed for sealing joints between sheet materials, as well as between sheet material and perpendicular adjacent planes and holes from screws.

Application conditions:

The air temperature is not lower than + 5 °C, the relative humidity is not more than 75%.

Storage conditions:

Air temperature during transportation and storage should not be below +1°C and above +35°C. Transportation and storage at air temperature up to -40°C for a period of not more than 25 days is allowed. Allowed a total of 5 cycles of freezing and thawing of the product. There is a decrease in its shelf life during transportation and storage of the product at a temperature above + 35 C.

Surface preparation:

Surface preparation before application includes mechanical cleaning of dust and dirt and if necessary, it’s degreasing.

Solvent:

Water from a centralized source of water supply.

* Note: this text contains only general (introductory coverage) information. More information you can obtain by contacting the representative of the company "Innovative technologies".

Do you found a mistake or inaccuracy? Select it, press Ctrl + Enter, and we will fix it!

Our production

The information presented on this Internet resource is provided by Innovation Technologies LLC and is intended to be used as a general overview. The reference data, specifications and recommendations contained therein are for informational purposes only. More complete information is contained in Technological maps of Innovative Technologies LLC. Product data is subject to change without notice. Obtaining proper advice regarding the intended use of these and other products of the Innovation Technologies LLC company is possible by contacting the company's head or regional offices.

The company Innovation Technologies LLC is not responsible for any actions taken or not taken based on this publication. The supply of products and any technical assistance are provided in accordance with the General Terms of Sales, Supplies and Services of Innovative Technologies LLC, unless otherwise agreed in writing. The systems and technical information posted on this website should be regarded as recommended and not binding.

Other specifications are possible, tailored to customer needs. For up-to-date information, contact the head or regional offices of the company Innovation Technologies.


Copyright © 2022 Innovative Technologies


Яндекс.Метрика



Site development Internet Idea